## Summary
This PR adds **scoped workflows** to Gitea Actions. Workflows defined
centrally in a "source" repository that automatically run on every
repository in scope: an organization's repositories, or (for instance
admins) every repository on the instance. Each scoped run executes in
the consuming repository's own context (its runners, secrets, and
branch) while its content is read from the source repository, so an org
or instance can mandate shared CI across many repositories without
copying workflow files into each one.
An owner or instance admin registers source repositories on a settings
page and can mark individual workflows as **required**. A required
scoped workflow cannot be opted out by a consuming repository and gates
its pull-request merges; an optional one can be disabled per repository.
Scoped workflows live under a dedicated `SCOPED_WORKFLOW_DIRS` (default
`.gitea/scoped_workflows`), kept separate from regular `WORKFLOW_DIRS`.
## Main changes
### Configuration
New `SCOPED_WORKFLOW_DIRS` setting, validated to not overlap with
`WORKFLOW_DIRS`. Default: `.gitea/scoped_workflows`
### Data model & migration
- New `action_scoped_workflow_source` table mapping a registering owner
(`owner_id`, where `0` = instance-level) to a source repository, with a
per-workflow `WorkflowConfigs` map.
- `ActionRun` gains `WorkflowRepoID` / `WorkflowCommitSHA` (the pinned
content source) and an `IsScopedRun` flag.
### Detection & run creation
On consumer events, scoped workflows from the effective sources (the
owner's own sources plus instance-level ones) are matched and turned
into runs that execute in the consumer's context, with content pinned to
the source repo's default-branch commit.
`on: workflow_run` and `on: schedule` are currently not supported.
### Opt-out
A consuming repository can disable an optional scoped workflow (tracked
separately from regular `DisabledWorkflows`); required scoped workflows
can never be disabled, opted out, or bypassed.
### Commit status
A scoped run's status context format is `"<source repo full name>:
<workflow display name> / <job> (<event>)"`
(for example: `my-org/scoped-workflows: db-tests / test-sqlite
(pull_request)`),
keeping it distinct from a same-named repo-level workflow and from other
sources.
### Required status checks
Admins mark workflows required and supply status-check patterns.
`EffectiveRequiredContexts` appends those patterns to the branch
protection's required contexts and they are matched
must-present-and-pass. If the status checks from scoped workflows fail,
the PR cannot be merged.
NOTE: scoped workflows' required status checks patterns can protect any
target branch that has a protection rule, even though the rule's "Status
Check" is disabled. A target branch with no protection rule cannot be
protected.
<details>
<summary>Screenshots</summary>
<img width="1400" alt="image"
src="https://github.com/user-attachments/assets/a5d1db33-15ec-487e-93be-2bc04b4e6643"
/>
</details>
### Reusable workflows (`uses:`)
A scoped workflow's local `uses: ./...` resolves against the source
repository. `uses:` directory validation honors the
instance-configurable `WORKFLOW_DIRS` and `SCOPED_WORKFLOW_DIRS`
(previously hardcoded to `.gitea`/`.github/workflows`).
### Manual dispatch
`workflow_dispatch` is supported for scoped workflows (web and API),
resolving inputs/content from the source repo.
### Performance
A process-local LRU cache keyed by source repo ID for the per-source
workflow parse, so instance-level and owner-level sources don't open the
source repo and parse workflow files on every event.
### UI
Org / user / admin pages to register and remove sources, search
repositories, and mark workflows required with their status-check
patterns. The repository Actions sidebar groups scoped workflows by
source with owner/instance labels and required/disabled badges.
<details>
<summary>Screenshots</summary>
Scoped workflows setting page:
<img width="1600" alt="image"
src="https://github.com/user-attachments/assets/9d19f667-97a5-4935-92b2-e53f105e3642"
/>
Consumer repo's Actions runs list:
<img width="1600" alt="image"
src="https://github.com/user-attachments/assets/a77241f9-0aa9-41aa-ba73-12a9a688cb64"
/>
- `Owner`: this is a owner-level scoped workflows source repo
- `Global`: this is a global scoped workflows source repo
- `Required`: this scoped workflow is required, repo admin cannot
disable it
</details>
---
Docs: https://gitea.com/gitea/docs/pulls/447
---------
Co-authored-by: bircni <bircni@icloud.com>
Support `continue-on-error` for workflow jobs when aggregating an
Actions workflow run status.
Previously, `continue-on-error` was parsed from workflow YAML but was
not persisted or used when calculating the overall run result. As a
result, a failed job could incorrectly fail the entire workflow even
when the workflow explicitly allowed that job to fail.
This PR stores the parsed `continue-on-error` value on each action run
job and treats failed jobs with `continue-on-error: true` as successful
when computing the workflow run status, matching GitHub Actions
behavior.
## Changes
- Add `ContinueOnError` to `jobparser.Job`.
- Add `continue_on_error` to `ActionRunJob` with a `NOT NULL DEFAULT
FALSE` migration.
- Populate `ActionRunJob.ContinueOnError` when creating workflow run
jobs.
- Update workflow status aggregation so failed `continue-on-error` jobs
do not fail the overall run.
- Leave `resolveCheckNeeds` unchanged so dependent jobs still see the
job result as `failure` and are skipped by default.
## Compatibility
This is backward compatible.
If only the runner or only the server is updated, `continue-on-error`
continues to degrade to the previous behavior and is effectively ignored
until both sides support it.
Related runner PR: https://gitea.com/gitea/runner/pulls/1032
---------
Signed-off-by: bircni <bircni@icloud.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
## Summary
This PR improves reusable workflow support for Gitea Actions. The
parsing of the called workflow now happens on Gitea side, not on the
runner. When the caller becomes ready, Gitea fetches the called workflow
source, parses it, and inserts each child job into the database as a
`ActionRunJob` linked to the caller via `ParentCallJobID`. As a result,
every callee job is dispatched as its own task and its logs surface as
an independent job entry in the UI, rather than being inlined into the
caller's "Set up job" step.
This PR supports two kinds of `uses` :
- same-repo call: `uses: ./.gitea/workflows/foo.yaml`
- cross-repo call: `uses: OWNER/REPO/.gitea/workflows/foo.yaml@REF`
## **⚠️ BREAKING ⚠️**
External reusable workflows (`uses:
https://other-gitea-instance/OWNER/REPO/.gitea/workflows/test.yaml@REF`)
are no longer supported. To keep using them, clone the repositories to
the local instance.
## Main changes
### Execution model
- Each caller job carries `IsReusableCaller=true` and won't be fetched
by runners.
- `ParentCallJobID` can link a called job to its caller.
- Caller status is derived from its direct children.
### Workflow syntax
- `jobparser` now supports parsing `on: workflow_call` trigger with
`inputs:`, `outputs:`, and `secrets:` declarations.
- **Max nesting depth**: capped at `MaxReusableCallLevels = 9`, which
means a top-level caller may have at most 9 nested callers below it.
- **Cycle prevention**: at expansion time, `checkCallerChain` walks the
caller's ancestor chain via `ParentCallJobID` and rejects if the same
`uses:` string appears anywhere upstream (`reusable workflow call cycle
detected`). This catches both direct (`A -> A`) and indirect (`A -> B ->
A`) cycles.
### Cross-repo access
- To share reusable workflows from private repos, use `Collaborative
Owners` introduced by #32562
### Rerun semantics
- `expandRerunJobIDs` partitions the latest attempt's jobs into:
- a **rerun set**: jobs being rerun + downstream siblings within the
same scope.
- an **ancestor set**: reusable callers whose only *some* descendants
are being rerun (the caller itself is not).
- Cloning behavior for callers in `execRerunPlan`:
- **Caller is fully rerun** (caller's `AttemptJobID` in `rerunSet`):
none of its descendants are cloned. The caller is cloned with
`IsCallerExpanded=false`, and re-expansion (which reinserts the children
fresh) happens later when the resolver brings the caller to `Waiting`
again.
- **Caller is in ancestor set** (only some descendants rerun): the
caller is pass-through (`Status` will be updated by its fresh children).
Its non-rerun descendants are also pass-through clones (point
`SourceTaskID` at the original task). Their `ParentCallJobID` is
remapped to the new attempt's caller row.
### UI
- Job list in `RepoActionView.vue` is now tree-shaped: callers indent
their children. Callers default to collapsed.
- New caller detail page using `WorkflowGraph` to show direct children
only; the run summary's `WorkflowGraph` shows top-level callers and
their immediate descendants.
### Known trade-offs
- **Caller expansion runs inside the enclosing write transaction.**
`expandReusableWorkflowCaller` performs a git read of the called
workflow while holding the row locks that update the caller and insert
its children. This is intentional: the caller-row update and child-row
inserts must commit atomically. None of the call sites is hot (each
caller is expanded once per attempt), so the trade-off is acceptable.
- **A malformed `if:` expression on a job leaves it `Blocked`
silently.** `evaluateJobIf` now runs server-side as part of resolver
passes; deterministic expression errors (typos, undefined context
fields) are logged but do not surface in the UI. This is the same
behavior the resolver already had for concurrency-expression errors.
Distinguishing transient DB errors from user-authored expression errors
and writing the latter back as `StatusFailure` is a follow-up.
#### Screenshots
<img width="1600" alt="image"
src="https://github.com/user-attachments/assets/bfaa9b7a-07e9-4127-8de9-a81f86e82828"
/>
<img width="1600" alt="image"
src="https://github.com/user-attachments/assets/8af109b3-ef28-4b53-aaad-d4632b923224"
/>
## References
-
https://docs.github.com/en/actions/how-tos/reuse-automations/reuse-workflows
-
https://docs.github.com/en/actions/reference/workflows-and-actions/reusing-workflow-configurations
---
Replace #36388
---------
Signed-off-by: Zettat123 <zettat123@gmail.com>
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Claude (Opus 4.7) <noreply@anthropic.com>
This PR introduces a new `ActionRunAttempt` model and makes Actions
execution attempt-scoped.
**Main Changes**
- Each workflow run trigger generates a new `ActionRunAttempt`. The
triggered jobs are then associated with this new `ActionRunAttempt`
record.
- Each rerun now creates:
- a new `ActionRunAttempt` record for the workflow run
- a full new set of `ActionRunJob` records for the new
`ActionRunAttempt`
- For jobs that need to be rerun, the new job records are created as
runnable jobs in the new attempt.
- For jobs that do not need to be rerun, new job records are still
created in the new attempt, but they reuse the result of the previous
attempt instead of executing again.
- Introduce `rerunPlan` to manage each rerun and refactored rerun flow
into a two-phase plan-based model:
- `buildRerunPlan`
- `execRerunPlan`
- `RerunFailedWorkflowRun` and `RerunFailed` no longer directly derives
all jobs that need to be rerun; this step is now handled by
`buildRerunPlan`.
- Converted artifacts from run-scoped to attempt-scoped:
- uploads are now associated with `RunAttemptID`
- listing, download, and deletion resolve against the current attempt
- Added attempt-aware web Actions views:
- the default run page shows the latest attempt
(`/actions/runs/{run_id}`)
- previous attempt pages show jobs and artifacts for that attempt
(`/actions/runs/{run_id}/attempts/{attempt_num}`)
- New APIs:
- `/repos/{owner}/{repo}/actions/runs/{run}/attempts/{attempt}`
- `/repos/{owner}/{repo}/actions/runs/{run}/attempts/{attempt}/jobs`
- New configuration `MAX_RERUN_ATTEMPTS`
- https://gitea.com/gitea/docs/pulls/383
**Compatibility**
- Existing legacy runs use `LatestAttemptID = 0` and legacy jobs use
`RunAttemptID = 0`. Therefore, these fields can be used to identify
legacy runs and jobs and provide backward compatibility.
- If a legacy run is rerun, an `ActionRunAttempt` with `attempt=1` will
be created to represent the original execution. Then a new
`ActionRunAttempt` with `attempt=2` will be created for the real rerun.
- Existing artifact records are not backfilled; legacy artifacts
continue to use `RunAttemptID = 0`.
**Improvements**
- It is now easier to inspect and download logs from previous attempts.
-
[`run_attempt`](https://docs.github.com/en/actions/reference/workflows-and-actions/contexts#github-context)
semantics are now aligned with GitHub.
- > A unique number for each attempt of a particular workflow run in a
repository. This number begins at 1 for the workflow run's first
attempt, and increments with each re-run.
- Rerun behavior is now clearer and more explicit.
- Instead of mutating the status of previous jobs in place, each rerun
creates a new attempt with a full new set of job records.
- Artifacts produced by different reruns can now be listed separately.
Signed-off-by: Zettat123 <zettat123@gmail.com>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Claude Opus 4.7 <noreply@anthropic.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
This PR migrates the web Actions run/job routes from index-based
`runIndex` or `jobIndex` to database IDs.
**⚠️ BREAKING ⚠️**: Existing saved links/bookmarks that use the old
index-based URLs will no longer resolve after this change.
Improvements of this change:
- Previously, `jobIndex` depended on list order, making it hard to
locate a specific job. Using `jobID` provides stable addressing.
- Web routes now align with API, which already use IDs.
- Behavior is closer to GitHub, which exposes run/job IDs in URLs.
- Provides a cleaner base for future features without relying on list
order.
- #36388 this PR improves the support for reusable workflows. If a job
uses a reusable workflow, it may contain multiple child jobs, which
makes relying on job index to locate a job much more complicated
---------
Signed-off-by: Zettat123 <zettat123@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
This PR adds official REST API endpoints to rerun Gitea Actions workflow
runs and individual jobs:
* POST /api/v1/repos/{owner}/{repo}/actions/runs/{run}/rerun
* POST /api/v1/repos/{owner}/{repo}/actions/runs/{run}/jobs/{job_id}/rerun
It reuses the existing rerun behavior from the web UI and exposes it
through stable API routes.
---------
Signed-off-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
Fix#28761Fix#27884Fix#28093
## Changes
### Rerun all jobs
When rerun all jobs, status of the jobs with `needs` will be set to
`blocked` instead of `waiting`. Therefore, these jobs will not run until
the required jobs are completed.
### Rerun a single job
When a single job is rerun, its dependents should also be rerun, just
like GitHub does
(https://github.com/go-gitea/gitea/issues/28761#issuecomment-2008620820).
In this case, only the specified job will be set to `waiting`, its
dependents will be set to `blocked` to wait the job.
### Show warning if every job has `needs`
If every job in a workflow has `needs`, all jobs will be blocked and no
job can be run. So I add a warning message.
<img
src="https://github.com/go-gitea/gitea/assets/15528715/88f43511-2360-465d-be96-ee92b57ff67b"
width="480px" />
Zettat123